Comprehensive List of Container Components & Accessories

I. Container Corner Fittings and Corner Posts

• Container Corner Fitting: Positioned at each of the eight corners of the container, used for supporting, stacking, loading/unloading, and securing the container.
• Container Corner Post: A vertical column connecting the top and bottom corner fittings, serving as the primary load-bearing component of the container.

II. Container End and Side Beams

• Container Top End Transverse Member: A horizontal beam at the end of the container connecting the left and right top corner fittings.
• Container Bottom End Transverse Member: A horizontal beam at the end of the container connecting the left and right bottom corner fittings.
• Container Top Side Rail: A longitudinal beam on the upper part of the sidewall connecting the front and rear top corner fittings.
• Container Bottom Side Rail: A longitudinal beam on the lower part of the sidewall connecting the front and rear bottom corner fittings.

III. Container Door End Components

• Container Door Header Plate: The beam above the container door.
• Container Door Sill: The beam below the container door.
• Container Door Panel: The panel forming the container door.
• Container Door Frame Top Rail: The upper part of the door frame.
• Container Door Frame Bottom Rail: The lower part of the door frame.
• Container Door Hinge: A component connecting the door panel to the container body.
• Container Door Lock Rod: A rod used to secure the door panel.
• Container Door Lock Rod Bracket: A component supporting the door lock rod.
• Container Door Handle: A handle for opening and closing the door panel.
• Container Door Gasket: A rubber strip sealing the door gap.
• Container Door Gasket Retainer: A strip fixing the door gasket in place.

IV. Container Base Assembly Components

• Container Floor Sheet: The panel at the bottom of the container body.
• Container Cross Member: A horizontal steel beam at the bottom, enhancing structural strength.
• Container Gooseneck Tunnel: Located at the front end of the container, designed to accommodate the gooseneck of a chassis.
• Container Fork Pocket: A slot allowing forklifts to easily lift and move the container.

V. Container Roof and Side Panels

• Container Roof Sheet: The panel at the top of the container body.
• Container Side Panel: The panel on the side of the container body.

VI. Other Container Accessories

• Container Ventilator: A window fixed on the side or end wall of the container for air pressure balance and airflow exchange.
• Container Lock: Includes padlocks, manual locks, electronic locks, etc., ensuring the security of the container.
• Container Lifting Eye: A component used for lifting the container.
• Container Rivet: A fastener connecting various components of the container.
• Container Bolt & Nut: Used for fixing and connecting various components of the container.
• Container Consolidated Plate: An identification plate listing important information about the container.
• Container CSC Plate: Lists all important information about the container, serving as a valid safety certification mark to ensure the container is sturdy enough and meets safety standards for transporting goods.

Our company manufactures all the container components and accessories listed above. With 15 years of production and sales experience in China, we welcome global buyers to inquire and place orders. from suyee@ssshun.com